Spot Hop + The High Sierra Network Utilities

With OnStar, you have the capability to have internet service! Unlimited for 20$, it's how I've been doing business since this disaster for awhile.

Here are some stats from the middle of the wreckage town using OnStar;

All California Servers.

Keep in mind that it usually ends up much better than this when on the road to civilization.

Stats from T-Mobile Hotspot with only my laptop attached;

Not bad! The servers my phone tries to contact are strictly East Coast.

With Restored Internet that hasn't been interrupted for about three days;

Much faster! See again that the servers this is pinging are in Atlanta. Let's Traceroute;

If you didn't know, Mac has a Network Utility application that's a GUI version of all the things we would type into a Microsoft Command Line. The Terminal gives us a smidgen more information.

Notice in the Terminal window how the asterisks appear; Some router on our journey is having a bit of trouble.

Watch when I run the test again;

Now we're in even faster with the help of Dallas, TX.

Comments

Connecting IoT Devices to a Registration Server (Packet Tracer, Cisco)

If you're seeing this post, I'm helping you, and you probably have LI presence: React and share this post to help me in return. In Packet Tracer, a demo software made by Cisco Systems. It certainly has changed a lot since 2016. It's almost an Olympic feat to even get started with it now, but it does look snazzy. This is for the new CCNA, that integrates, among other things, IoT and Automation, which I've worked on here before. Instructions here . I don't know if this is an aspect of "Let's make sure people are paying attention and not simply following blindly", or an oversight - The instructions indicate a Meraki Server, when a regular one is the working option here. I have to enable the IoT service on this server. Also, we assign the server an IPv4 address from a DHCP pool instead of giving it a static one. For something that handles our IoT business, perhaps that's safer; Getting a new IPv4 address every week or so is a minimal step against an

Create a Simple Network (Packet Tracer) + A Walkthrough

Again; I've done this, but now there's so many new things, I'm doing it again. The truly new portions were...everything on the right side of this diagram; The cloud needed a coax connector and a copper Ethernet connector. It's all easy to install, turn off the cloud (Weird), install the modules. Getting the Cable section of Connections was an unusual struggle - The other drop down menu had nothing within. It required going into the Ethernet options and setting the Provider Network to 'cable', which is the next step AFTER the drop-downs. The rest was typical DHCP and DNS setups, mainly on the Cisco server down there. The post is rather short - How about adding a video to it? Find out what A Record means - This site says 'Maps a name to an IP address', which is DNS. So it's another name for DNS? You can change them (presumably in a local context) to associate an IP address to another name.

Securing Terraform and You Part 1 -- rego, Tfsec, and Terrascan

9/20: The open source version of Terraform is now OpenTofu Sometimes, I write articles even when things don't work. It's about showing a learning process. Using IaC means consistency, and one thing you don't want to do is have 5 open S3 buckets on AWS that anyone on the internet can reach. That's where tools such as Terrascan and Tfsec come in, where we can make our own policies and rules to be checked against our code before we init. As this was contract work, I can't show you the exact code used, but I can tell you that this blog post by Cesar Rodriguez of Cloud Security Musings was quite helpful, as well as this one by Chris Ayers . The issue is using Rego; I found a cool VS Code Extension; Terrascan Rego Editor , as well as several courses on Styra Academy; Policy Authoring and Policy Essentials . The big issue was figuring out how to tell Terrascan to follow a certain policy; I made it, put it in a directory, and ran the program while in that directory

RUN TCP/IP | Morgan Lucas is Tech Blogging

Search This Blog