Skip to main content

Configure the Network For Your Virtual Machines (Azure)

  1. Create an Azure Virtual Network
  2. Create an Azure VPN Gateway
  3. Learn to Work with Azure ExpressRoute

 Oddly, none of those options are in a Sandbox, and require an actual Azure subscription for learners, like some other segments. Ah well, let's briefly talk about Azure VPNs.

Azure VNs provide the same network capabilities as regular VNs, or even VLANs that are spread out physically, and you may need to jump onto Layer 3 to access your virtual neighbor in another cubicle.




  • Isolation
  • Segmentation
  • Internet communications
  • Route and Filter Network Traffic
VMs in Azure can connect to the internet by default. Makes sense, but maybe you don't want that. Perhaps you just want to set it up and play around on it.

My guess is that you go to the Dashboard, see the list on the left, hit Virtual Machines and poke around for an option to turn it off.

Or, you could make an Access Control List and set it to deny all for incoming traffic.

Or set it to a private IPv4 address that can't be routed over the internet.

When you create a virtual network, remember to consider the location of the users and the machine hosting it.

When you've made them all, go to the Virtual Networks tab and connect them together.

You can even do it in Powershell first by making the network and then making the machines and delegating the network they should be within.



Gosh, that is so much easier that fiddling around in the VirtualBox settings. What a time to be alive.


Labels:

Comments

Post a Comment

Popular posts from this blog

Connecting IoT Devices to a Registration Server (Packet Tracer, Cisco)

 If you're seeing this post, I'm helping you, and you probably have LI presence: React and share this post to help me in return.   In Packet Tracer, a demo software made by Cisco Systems. It certainly has changed a lot since 2016. It's almost an Olympic feat to even get started with it now, but it does look snazzy. This is for the new CCNA, that integrates, among other things, IoT and Automation, which I've worked on here before. Instructions here . I don't know if this is an aspect of "Let's make sure people are paying attention and not simply following blindly", or an oversight - The instructions indicate a Meraki Server, when a regular one is the working option here. I have to enable the IoT service on this server. Also, we assign the server an IPv4 address from a DHCP pool instead of giving it a static one. For something that handles our IoT business, perhaps that's safer; Getting a new IPv4 address every week or so is a minimal step against an
Post a Comment
Read more

Create a Simple Network (Packet Tracer) + A Walkthrough

Again; I've done this, but now there's so many new things, I'm doing it again. The truly new portions were...everything on the right side of this diagram; The cloud needed a coax connector and a copper Ethernet connector. It's all easy to install, turn off the cloud (Weird), install the modules. Getting the Cable section of Connections was an unusual struggle - The other drop down menu had nothing within. It required going into the Ethernet options and setting the Provider Network to 'cable', which is the next step AFTER the drop-downs. The rest was typical DHCP and DNS setups, mainly on the Cisco server down there. The post is rather short - How about adding a video to it? Find out what A Record means - This site says 'Maps a name to an IP address', which is DNS. So it's another name for DNS? You can change them (presumably in a local context) to associate an IP address to another name.
Post a Comment
Read more

Securing Terraform and You Part 1 -- rego, Tfsec, and Terrascan

9/20: The open source version of Terraform is now  OpenTofu     Sometimes, I write articles even when things don't work. It's about showing a learning process.  Using IaC means consistency, and one thing you don't want to do is have 5 open S3 buckets on AWS that anyone on the internet can reach.  That's where tools such as Terrascan and Tfsec come in, where we can make our own policies and rules to be checked against our code before we init.  As this was contract work, I can't show you the exact code used, but I can tell you that this blog post by Cesar Rodriguez of Cloud Security Musings was quite helpful, as well as this one by Chris Ayers . The issue is using Rego; I found a cool VS Code Extension; Terrascan Rego Editor , as well as several courses on Styra Academy; Policy Authoring and Policy Essentials . The big issue was figuring out how to tell Terrascan to follow a certain policy; I made it, put it in a directory, and ran the program while in that directory
Post a Comment
Read more